D Type High Speed Single Station Plastic Bottle Blow Molding Machine with IML for 2 Heads Plastic Medicine Bottle
SLD series:
1: this machine is suitable for the production of 200ML 10L plastic hollow products, the use of curved elbow lock system, low energy consumption, the center of the lock, the lock force, speedF aster, run more smoothly.
2: die opening and closing system: specially designed for Heng lock mould mechanism using a high pressure mode locking, locking plate stress in the centre of the template, clamping force, openThe rigid lock template, even if the ultra wide die is also fitted.
3: die head system: all the use of 38CRMOALA and other materials, the precision machining and heat treatment.With three Guide Pillar Tie Bar Design Clamping Unit.and production Volume:2ml~15LMulti layers: Co-Extrusion 1 Layer.
4: Check daily
1) Wire of heat ring is broken or not.
2) Temperature control “0” positation.
3) All electric switches, esp. switches of safety door and emergency stop.
4) Fixing screw of mould.
5) Recycling supply of cooling water.
6) Sensitivity and correctness of pressure meter.
7) Oil height.
| SPECIFICATION | SLD-80 |
| MATERIAL | | PE,PP,EVA,ABS,PS |
| MAX CONTAINER CAPACITY | L | 15 |
| NUMBER OF DIE HEAD | SET | 1,2,3,4,6 |
| OUPUT(DRY CYCLE) | PC/HR | 600 |
| MACHINE DIMENSION (LxWxH ) | MM | 4600x2600x2200 |
| TOTAL WEIGHT | TON | 8T |
| CLAMPING UNIT | |
| CLAMPING FORCE | KN | 68 |
| PLATEN OPENING STROKE | MM | 300-650 |
| PLATEN SIZE(WxH) | MM | 350x400 |
| MAX MOULD SIZE(WxH) | MM | 450x400 |
| MOLD THICKNESS | MM | 305-350 |
| EXTRUDER UNIT | |
| SCREW DIAMETER | MM | 80 |
| SCREW L/D RATIO | L/D | 25 |
| MELTING CAPACITY | KG/HR | 120 |
| BARREL HEATING POWER | KW | 24 |
| NUMBER OF HEATING ZONE | ZONE | 4 |
| EXTRUDER MOTOR RATED POWER | KW | 30 |
| DIE HEAD | |
| NUMBER OF DIE HEATING ZONE | ZONE | 2-5 |
| POWER OF DIE HEATING | KW | 8 |
| CENTER DISTANCE OF DOUBLE DIE | MM | 160 |
| CENTER DISTANCE OF THREE DIE | MM | 110 |
| CENTER DISTANCE OF FOUR DIE | MM | 100 |
| CENTER DISTANCE OF SIX DIE | MM | 80 |
| MAX DIE-PIN DIAMETER | MM | 280 |
| POWER | |
| MAX DRIVE POWER | KW | 30 |
| TOTAL POWER | KW | 82 |
| FAN POWER OF SCREW | KW | 3.6 |
| AIR PRESSURE | MPA | 0.6 |
| AIR CONSUMPTION | M3/MIN | 0.5 |
| AVERAGE ENERGY CONSUMPTION | KW | 28 |
Product Tags:
|
|
2 Head Medicine Bottle Blow Molding Machine Moulding Machine Images
|
