D Type High Speed Single Station Plastic Bottle Blow Molding Machine with IML for Plastic Sport Bottle
SLD series:
1: this machine is suitable for the production of 200ML 10L plastic hollow products, the use of curved elbow lock system, low energy consumption, the center of the lock, the lock force, speedF aster, run more smoothly.
2: die opening and closing system: specially designed for Heng lock mould mechanism using a high pressure mode locking, locking plate stress in the centre of the template, clamping force, openThe rigid lock template, even if the ultra wide die is also fitted.
3: hydraulic system: full hydraulic double proportional hydraulic control, equipped with imported famous brand hydraulic valve and oil pump, stable, reliable.This machine is suitable for bottles, detergent bottles, oil pot, plastic toys, cosmetics bottles, beverage bottles, chemical Hardware
Multi cavities: 1~4 cavities and Designed for the PE/PP/PETG/PVC/Co-Extrusion material
die head system: all the use of 38CRMOALA and other materials, the precision machining and heat treatment.
4.Safety rules should be followed in operating the machine:
1) Do not start the machine before knowing its features and operating procedure .
2) Before each operation, check the reliability of safety switches and safety doors. Do not start machine before confirming all safety devices are perfect and effective.
3) Do not randomly touch moving, heating and energizing parts during running. Do not stretch out into mold clamping device. Do not stretch out head. Stop oil pump motor and switch off power in repair. Be ware of hot material barrel!
4) Two personnels are forbidden to operate one machine at one time except in installing mould.
| SPECIFICATION | SLD-75 |
| MATERIAL | | PE,PP,EVA,ABS,PS |
| MAX CONTAINER CAPACITY | L | 10 |
| NUMBER OF DIE HEAD | SET | 1,2,3,4,6 |
| OUPUT(DRY CYCLE) | PC/HR | 600 |
| MACHINE DIMENSION (LxWxH ) | MM | 4300x2400x2200 |
| TOTAL WEIGHT | TON | 7.5T |
| CLAMPING UNIT | |
| CLAMPING FORCE | KN | 65 |
| PLATEN OPENING STROKE | MM | 220-530 |
| PLATEN SIZE(WxH) | MM | 320x350 |
| MAX MOULD SIZE(WxH) | MM | 400x350 |
| MOLD THICKNESS | MM | 225-320 |
| EXTRUDER UNIT | |
| SCREW DIAMETER | MM | 75 |
| SCREW L/D RATIO | L/D | 25 |
| MELTING CAPACITY | KG/HR | 95 |
| BARREL HEATING POWER | KW | 20 |
| NUMBER OF HEATING ZONE | ZONE | 4 |
| EXTRUDER MOTOR RATED POWER | KW | 22 |
| DIE HEAD | |
| NUMBER OF DIE HEATING ZONE | ZONE | 2-5 |
| POWER OF DIE HEATING | KW | 8 |
| CENTER DISTANCE OF DOUBLE DIE | MM | 130 |
| CENTER DISTANCE OF THREE DIE | MM | 110 |
| CENTER DISTANCE OF FOUR DIE | MM | 100 |
| CENTER DISTANCE OF SIX DIE | MM | 80 |
| MAX DIE-PIN DIAMETER | MM | 200 |
| POWER | |
| MAX DRIVE POWER | KW | 24 |
| TOTAL POWER | KW | 62 |
| FAN POWER OF SCREW | KW | 3.6 |
| AIR PRESSURE | MPA | 0.6 |
| AIR CONSUMPTION | M3/MIN | 0.5 |
| AVERAGE ENERGY CONSUMPTION | KW | 22 |
Product Tags:
|
|
Sport Bottle Extrusion Blow Molding Machine Images
|
