D Type High Speed Single Station Plastic Bottle Blow Molding Machine with IML for 2 Heads Plastic Soy Sauce Bottle
SLD series:
1: this machine is suitable for the production of 200ML 10L plastic hollow products, the use of curved elbow lock system, low energy consumption, the center of the lock, the lock force, speedF aster, run more smoothly.Multi cavities: 1~4 cavities and Designed for the PE/PP/PETG/PVC/Co-Extrusion material
2: die opening and closing system: specially designed for Heng lock mould mechanism using a high pressure mode locking, locking plate stress in the centre of the template, clamping force, openThe rigid lock template, even if the ultra wide die is also fitted.
3: hydraulic system: full hydraulic double proportional hydraulic control, equipped with imported famous brand hydraulic valve and oil pump, stable, reliable.
4: the safety devices and safety notes of blow molding machines. Owing to theunpredictability of danger, in the process of operation and maintenance, in addition to all the notes stated in this manual, safety should be paid attention to at any time.
Blow molding machine is equipped with reliable safety protecting devices. The safety devices installed in the machine are for the safety of the operators and the products. The machine can be operated only when all the safety equipment is running.
Special notes: Any alteration to the safety devices without permission is prohibited!! Bestar Machine are not liable to the consequence incurred by this alteration.
Every time before operating the machine, please check all the safety devices until they are reliable.
Bestar is not liable to any loss and damage incurred by failing to observe the notes stated in this manual or follow the necessary notes in installing, running, checking or maintaining the machine.
| SPECIFICATION | SLD-80 |
| MATERIAL | | PE,PP,EVA,ABS,PS |
| MAX CONTAINER CAPACITY | L | 15 |
| NUMBER OF DIE HEAD | SET | 1,2,3,4,6 |
| OUPUT(DRY CYCLE) | PC/HR | 600 |
| MACHINE DIMENSION (LxWxH ) | MM | 4600x2600x2200 |
| TOTAL WEIGHT | TON | 8T |
| CLAMPING UNIT | |
| CLAMPING FORCE | KN | 68 |
| PLATEN OPENING STROKE | MM | 300-650 |
| PLATEN SIZE(WxH) | MM | 350x400 |
| MAX MOULD SIZE(WxH) | MM | 450x400 |
| MOLD THICKNESS | MM | 305-350 |
| EXTRUDER UNIT | |
| SCREW DIAMETER | MM | 80 |
| SCREW L/D RATIO | L/D | 25 |
| MELTING CAPACITY | KG/HR | 120 |
| BARREL HEATING POWER | KW | 24 |
| NUMBER OF HEATING ZONE | ZONE | 4 |
| EXTRUDER MOTOR RATED POWER | KW | 30 |
| DIE HEAD | |
| NUMBER OF DIE HEATING ZONE | ZONE | 2-5 |
| POWER OF DIE HEATING | KW | 8 |
| CENTER DISTANCE OF DOUBLE DIE | MM | 160 |
| CENTER DISTANCE OF THREE DIE | MM | 110 |
| CENTER DISTANCE OF FOUR DIE | MM | 100 |
| CENTER DISTANCE OF SIX DIE | MM | 80 |
| MAX DIE-PIN DIAMETER | MM | 280 |
| POWER | |
| MAX DRIVE POWER | KW | 30 |
| TOTAL POWER | KW | 82 |
| FAN POWER OF SCREW | KW | 3.6 |
| AIR PRESSURE | MPA | 0.6 |
| AIR CONSUMPTION | M3/MIN | 0.5 |
| AVERAGE ENERGY CONSUMPTION | KW | 28 |
Product Tags:
|
|
Soy Sauce Plastic Bottle Blow Molding Machine High Speed 200ml 4 Cavity PE Blowing Images
|
