D Type High Speed Single Station Plastic Bottle Blow Molding Machine with IML for 2 Heads Plastic Daily Cosmetics Bottle
SLD series:
1: this machine is suitable for the production of 200ML 10L plastic hollow products, the use of curved elbow lock system, low energy consumption, the center of the lock, the lock force, speedF aster, run more smoothly.
2: die opening and closing system: specially designed for Heng lock mould mechanism using a high pressure mode locking, locking plate stress in the centre of the template, clamping force, openThe rigid lock template, even if the ultra wide die is also fitted.
3:die head system: all the use of 38CRMOALA and other materials, the precision machining and heat treatment. hydraulic system: full hydraulic double proportional hydraulic control, equipped with imported famous brand hydraulic valve and oil pump, stable, reliable.
4:Blow molding machine is out from the extruder, is still in a state of softening tube thermal plastic plastic blank into the forming die, and then into the compressed air, use air pressure to make along the cavity deformation, blow to make mouth, short neck insulating products.
Blow molding machine is widely used for the production of various kinds of thin shell type hollow products, chemical and cosmetic packaging containers, as well as children’s toys and so on.
Blow molding machine (blow molding) is with the aid of gas pressure in the closed in the mold hot melt parison swell form hollow products method, is the third most common plastic processing methods, as well as rapid development of a plastic molding method.
The characteristics:
| SPECIFICATION | SLD-75 |
| MATERIAL | | PE,PP,EVA,ABS,PS |
| MAX CONTAINER CAPACITY | L | 10 |
| NUMBER OF DIE HEAD | SET | 1,2,3,4,6 |
| OUPUT(DRY CYCLE) | PC/HR | 600 |
| MACHINE DIMENSION (LxWxH ) | MM | 4300x2400x2200 |
| TOTAL WEIGHT | TON | 7.5T |
| CLAMPING UNIT | |
| CLAMPING FORCE | KN | 65 |
| PLATEN OPENING STROKE | MM | 220-530 |
| PLATEN SIZE(WxH) | MM | 320x350 |
| MAX MOULD SIZE(WxH) | MM | 400x350 |
| MOLD THICKNESS | MM | 225-320 |
| EXTRUDER UNIT | |
| SCREW DIAMETER | MM | 75 |
| SCREW L/D RATIO | L/D | 25 |
| MELTING CAPACITY | KG/HR | 95 |
| BARREL HEATING POWER | KW | 20 |
| NUMBER OF HEATING ZONE | ZONE | 4 |
| EXTRUDER MOTOR RATED POWER | KW | 22 |
| DIE HEAD | |
| NUMBER OF DIE HEATING ZONE | ZONE | 2-5 |
| POWER OF DIE HEATING | KW | 8 |
| CENTER DISTANCE OF DOUBLE DIE | MM | 130 |
| CENTER DISTANCE OF THREE DIE | MM | 110 |
| CENTER DISTANCE OF FOUR DIE | MM | 100 |
| CENTER DISTANCE OF SIX DIE | MM | 80 |
| MAX DIE-PIN DIAMETER | MM | 200 |
| POWER | |
| MAX DRIVE POWER | KW | 24 |
| TOTAL POWER | KW | 62 |
| FAN POWER OF SCREW | KW | 3.6 |
| AIR PRESSURE | MPA | 0.6 |
| AIR CONSUMPTION | M3/MIN | 0.5 |
| AVERAGE ENERGY CONSUMPTION | KW | 22 |
Product Tags:
|
|
Cosmetic Plastic Bottle Blow Molding Machine 10l 2 Head Single Station Images
|
