K series Tie Bar High Speed 2 Layers Double Station 2 Die head Blow Molding Machine for Plastic Sports Bottle
SLBK series
1: the mold head mechanism: the use of the split type of the head, not channeling material, more uniform, more uniform, plating processing, not accumulating material, the material is more smooth.
2: plasticizing system: frequency conversion motor Hardened reducer with high quality nitride barrel screw, variable frequency speed control, energy efficient and stable yield.with tie-bar design clamping unit and PLC.
3: The diameter shown is the minimum reference value, and the larger diameter is better for grounding.
This equipment cannot share the ground wire with other equipment. It must be grounded separately to meet the above requirements. Before the equipment is energized, it must be checked for grounding. If it is not grounded, it is strictly prohibited to start the machine!
Finally turn on the compressed air source; turn on the circulating cooling water.
| SPECIFICATION | SLBK-55 |
| MATERIAL | | PE,PP,EVA,ABS,PS |
| MAX CONTAINER CAPACITY | L | 2 |
| NUMBER OF DIE HEAD | SET | 1,2,3,4,6 |
| OUPUT(DRY CYCLE) | PC/HR | 1000x2 |
| MACHINE DIMENSION (LxWxH ) | MM | 3400x2200x2200 |
| TOTAL WEIGHT | TON | 5T |
| CLAMPING UNIT |
| CLAMPING FORCE | KN | 40 |
| PLATEN OPENING STROKE | MM | 120-400 |
| PLATEN SIZE(WxH) | MM | 260X330 |
| MAX MOULD SIZE(WxH) | MM | 300x330 |
| MOLD THICKNESS | MM | 125-220 |
| EXTRUDER UNIT |
| SCREW DIAMETER | MM | 55 |
| SCREW L/D RATIO | L/D | 25 |
| MELTING CAPACITY | KG/HR | 45 |
| BARREL HEATING POWER | KW | 12 |
| NUMBER OF HEATING ZONE | ZONE | 3 |
| EXTRUDER MOTOR RATED POWER | KW | 11 |
| DIE HEAD |
| NUMBER OF DIE HEATING ZONE | ZONE | 2-5 |
| POWER OF DIE HEATING | KW | 6 |
| CENTER DISTANCE OF DOUBLE DIE | MM | 130 |
| CENTER DISTANCE OF THREE DIE | MM | 80 |
| CENTER DISTANCE OF FOUR DIE | MM | 60 |
| CENTER DISTANCE OF SIX DIE | MM | 60 |
| MAX DIE-PIN DIAMETER | MM | 150 |
| POWER |
| MAX DRIVE POWER | KW | 18 |
| TOTAL POWER | KW | 32 |
| FAN POWER OF SCREW | KW | 2.4 |
| AIR PRESSURE | MPA | 0.6 |
| AIR CONSUMPTION | M3/MIN | 0.4 |
| AVERAGE ENERGY CONSUMPTION | KW | 13 |
Product Tags:
|
|
High Speed Continuous Extrusion Blow Molding Double Station , 6 Head Automatic Bottle Blowing Machine Images
|
